由Lesley_3ddes创建的Collets for Tap Holder

模型来自
loading...
模型描述
3D model of aubenc. The models were repaired and checked for printability.

As you can see, there's also collets for hex bits, size 6.25mm face to face.

They...显示更多 work fairly well, check out the pic with the piece of wood, it's a 15mm thick piece of oak and I have been able to go through it with the 1mm bit ! yes, it took me a while ;-)

Metric sizes only -sorry- 1mm 1.5mm 2mm 2.5mm 3mm 3.2mm 3.5mm 4mm 4.5mm 4.8mm 5mm 6mm 6.5mm and 8mm

Everything is provided with 3 different gap/tolerance values: 0.10, 0.25 and 0.50 mm

The OpenSCAD has not been much tested, some features are not even finish... oups!

Anyway, for drill bits (cylindrical) and hex bits should work quite fine.
关于模型设计师
50 models uploaded
简介已审核