Shelf System for Faceted Bowl by Alexander_3d

Model by
loading...
Model Description
3D model of turbo_sunshine
The models were repaired and checked for printability.

I keep using the Faceted Bowl by billbo1958 as a standart material sample test...Show more every time i get a new filament, and I needed a shelf system to store the bowls.

The Bowls and Shelves on the pictures are all printed at 70% scale, due to my printer not being able to print bigger.

No glue is required to use as illustrated, However it might be beneficial if one plans on using the shelves extensively.

Make sure you don't get any warping when printing these, or else it might ruin the connecting part of the system! So use higher bed temperatures!

No support is needed. Designed with 0.3mm clearance at 100%. No need for fancy setting when printing.

Print the Shelves upside down (legs pointing upwards)
Print the Sides flat (with the little SunShine logo pointing upwards (use the lay flat command when slicing))
https://www.instagram.com/sunshine_turbo
About The Model’s Author
33 models uploaded
Approved profile