由Tim_3dworld创建的Loft window bracket (variable position)

模型来自
loading...
模型描述
3D model of francfalco
The models were repaired and checked for printability.

My loft window would only hold position at fully open or closed - the gas struts that...显示更多 allowed it to open didn't have intermediate positions...

So i designed and printed a variable position bracket to allow me to hold the window open at any position i wanted. Can also be used to keep box,trunk, etc. lids open
Printed in PLA @ 0.3mm with a high infill for main support parts
No supports or rafts needed (small inbuilt support to remove from 'Window_base.stl)

Enjoy!

DISCLAIMER:
PLEASE, please DONOT use this bracket as the only support for the window or lid - it should only be used as a stay bracket and in a light loading situation.

NEVER use this bracket as a safety device in an environment where small children have access to open windows.

I accept no liability for any damage or injury caused by or as a result by the use of this item. ©2014
http://twitter.com/francfalco
关于模型设计师
47 models uploaded
简介已审核