Bewertungen
4.8/5(185 Bewertungen)

 

Zeige 1-10 von 185 Einträgen.
30.12.2023
Speed
Quality
Communication
Response: Speed: printing the models normally takes 70 hours. It was dispatched a few days before the deadline indicated by Treatstock Quality: The model contains no significant defects, no defects were reported by the customer and the order was even liked before dispatch Communication: The customer was adequately informed about the status of the order
Gedruckt auf: FlashForge Creator Pro
Material: PLA
Blau
Review image #5153223Review image #5153222Review image #5153221Review image #5153224
27.11.2023
Speed
Quality
Communication
All fine, quick and without hickups
Gedruckt auf: FlashForge Creator Pro
Material: PLA
Schwarz
Review image #5113249Review image #5113248
14.10.2023
Speed
Quality
Communication
Response: The model contains areas (especially undercuts and overhangs) that are unsuitable for ABS, so the model cannot be perfect.
Gedruckt auf: FlashForge Creator Pro
Material: ABS
Weiß
Review image #5058871Review image #5058870
29.08.2023
Speed
Quality
Communication
All perfect - as usual! Many thanks!
Gedruckt auf: Creator 3
Material: PLA
Schwarz
Review image #5009449Review image #5009450
25.08.2023
Speed
Quality
Communication
very good prints, good communication, everything perfect.
Gedruckt auf: Creator 3
Material: PLA
Weiß
Review image #5008419Review image #5008415Review image #5008416Review image #5008420Review image #5008418Review image #5008426Review image #5008428Review image #5008427Review image #5008417Review image #5008413Review image #5008425Review image #5008414Review image #5008423Review image #5008421Review image #5008422Review image #5008424
24.07.2023
Speed
Quality
Communication
Gedruckt auf: Creator 3
Material: Verschiedene Materialien Verschiedene Farben
Review image #4921397Review image #4921399Review image #4921396Review image #4921402Review image #4921401Review image #4921398Review image #4921400Review image #4921403Review image #4921395
04.06.2023
Speed
Quality
Communication
Review image #4899882
29.04.2023
Speed
Quality
Communication
I should have ordered at 60% filling. 40% is a bit too little.
Gedruckt auf: FlashForge Creator Pro
Material: PLA
Schwarz
Review image #4856085Review image #4856084
25.04.2023
Speed
Quality
Communication
Perfect - as usual from 3D-Easyprint!
Gedruckt auf: FlashForge Creator Pro
Material: Verschiedene Materialien Verschiedene Farben
Review image #4849454Review image #4849457Review image #4849458Review image #4849453Review image #4849456Review image #4849452Review image #4849455
18.04.2023
Speed
Quality
Communication
Gedruckt auf: FlashForge Creator Pro
Material: PLA
Rot
Review image #4790751Review image #4790750Review image #4790747Review image #4790744

Benötigen Sie etwas Besonderes?

Fordern Sie ein kostenloses Angebot an