Prusa 3D Original Prusa i3 MK2

Properties

Build Volume	250 x 210 x 200 mm (9.8 x 8.3 x 8 in.)
Layer Resolution Low	200 micron (0.008 in.)
Layer Resolution High	50 micron (0.002 in.)

Документация

prusa3d_manual_mk2_en_1.03.pdf

Обзоры
Prusa 3D
4.7 4 reviews

Качество Печати

Надежность

Ease Of Use

Failure Rate

Running Expenses

Software

Build Quality

Value

Клиентская Поддержка

Community

Show reviews Hide reviews

IslandFab

15 мар. 2022 г.

Great printer. Prusa has come along way since their MK3

Printer Room

22 июн. 2021 г.

Runs really good for long hours with little down time. Once you have it running perfectly and all calibrated, the printer can run for months at a time without needing maintenance.

Some points of failure over time are the bearings (replace ~1-2 years of heavy use), fans (replaced hotend cooling fan once within the first year, replaced with a noctua and no problems since), plastic cooling fan shroud melting/deforming (replace once every 1-3 months, temperature of printer can cause this piece to warp faster), hotbed wires breaking (failed once after 4 years of almost constant use), PEI bed sheet (replaced 3 times, about once every year)

Grapha 3D Print

5 мая 2021 г.

Perfect 3D printer for a print farm. Software is great and print farm software even better

ED3DLab

11 февр. 2021 г.

Very reliable product

Производитель	Prusa 3D
Тип оборудования	3D Printer
Технология	Моделирование методом послойного наплавления (FDM)
Материалы	PLA, ABS, Нейлон, Бронзовый PLA, HIPS, PET, Эластичный пластик (FLEX), Wood PLA, Brick PLA, Токорассеивающий пластик (ABS-ESD7), PC (поликарбонат), ASA, PETT, Резиноподобный материал (TPU ), PETG, Carbon Fiber (Углеволокно), POM (Делрин), XT-CLEAR, Ржавое магнитное железо PLA, ColorFabb XT CF20 (PET-G), nGen Amphora AM3300 (PET-G - сополиэфир PET), PLA-CF, (taulman) PCTPE, Токопроводящий PLA, PolyMax PLA, Мрамор PLA, nGen FLEX, PC-CF
Веб-сайт	http://shop.prusa3d.com/en/3d-printers/59-original-prusa-i3-mk2-kit.html
Средняя цена	699,00 $

О Original Prusa i3 MK2

Prusa i3 is a proven design with tens of thousands users all around the planet. Now you have a great opportunity to buy one directly from the author Josef Průša and support it's further development. All parts of this 3D printer are Open Source and are part of the RepRap project.

Обзоры 4.7 4 reviews