LittleRP LittleRP

LittleRP #0LittleRP #1LittleRP #2LittleRP #3

Properties

Build Volume 60 x 40 x 100 mm (2.3 x 1.6 x 3.9 in.)
Layer Resolution Low 100 micron (0.004 in.)
Layer Resolution High 50 micron (0.002 in.)
MarkeLittleRP
Maschinentyp 3D Printer
Technologie Stereolithografie (SLA)
Materialien Harz, Flexible Resin
Webseitehttp://www.littlerp.com/?page_id=22
Durchschnittlicher Preis 599,00 $

Über LittleRP

Meet the LittleRP, an affordable, flexible, and open 3D resin printer that lowers the barriers to entry for those looking to get into the exciting world of stereo-lithography printing.

The LittleRP has been designed from the ground up to simplify the resin printing process. Our focus on smaller high quality prints means complicated peeling mechanisms are not required.

Being open is one thing, but we wanted to make the LittleRP easy to self source. Lasercut materials and standard T-Slot extrusion means building your own from scratch, or simply modifying an existing LittleRP is an exercise you can take on yourself!
Inexpensive quality stereo lithography prints are possible thanks to the use of high quality components such as linear slides and integrated leadscrew steppers. The LittleRP might be inexpensive but corners were definitely not cut

Specifications:

Build Volume

60mm(X) 40mm(Y) 100mm(Z)

Build Speed

Approx 2 minutes per 1mm at .05mm layer height.

A 40mm tall object would take approximately 80 minutes to complete.

Electronics

Arduino compatible microcontroller

GRBL Firmware

Software

Envision Labs Creation Workshop
- STL Slicer
– Projector Controller
– Gcode Sender

 

Available Resins

Most general UV Curing Resin such as:

  • MakerJuice
  • – SubFlex
  • – SubSF)
  • MadeSolid
  • - MS resin

Resin Vat

  • PDMS (Standard)
  • Teflon (Tested)