Expertly made and impeccable packaging! Unfortunately, I made some mistakes when making these dew shields. Apparently, I forgot to make adjustments from the OD to the ID. Instead of allowing for the difference between the OD and ID, I made several of these at the wrong ID. So, after figuring out my mistake, I re-ordered another set and hopefully this will be the right ones!
Printed on:
| Original Prusa i3 MK3 |
Material:
|
PLA |
Excellent printing!! Fits like a glove. No flash or burrs, clean lines. Great Vendor, 10 stars!
Printed on:
| Creality CR-10 |
Material:
|
PLA+ |
Great printing! It was made almost the way I wanted it. It was a bit small for the application I was going to use it for, however, I made the mistake of scaling it wrong, no fault from the printer. I re-submitted the design for another attempt, this time a little bit bigger. Great job!
Printed on:
| Original Prusa i3 MK3 |
Material:
|
PETG |
Excellent printing! This person knows what he is doing! Packaging is impeccable! The threads on this adapter ring are perfect, excellent pitch. This person is at the top of my list of 3D printers!
Printed on:
| Original Prusa i3 MK3 |
Material:
|
PLA |
Excellent printing job! Exactly what I was expecting!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Excellent printing job! Exactly what I was expecting!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Excellent printing job! Exactly what I was expecting!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Excellent printing! I really was impressed with the packaging. This vendor made sure the package was well cushioned and wrapped to prevent any damage during shipping. Plus they are not that far away, being in NH and me in MA. 10 stars to Bellair!
Printed on:
| Original Prusa i3 MK3 |
Material:
|
PETG |
Great Job! Just what I was looking for. Everything is perfectly made, now to just get the needed screws to put it all together!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Great Job! I cannot wait to put this to use on my telescope some clear and WARM night in the near future!
Printed on:
| Creality CR-10 |
Material:
|
PETG |
Great job!
Printed on:
| Creality Ender 3 |
Material:
|
PLA |
Nice printing! A few burrs, some flash, but all around good!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PLA |
GREAT JOB! Nicely printed, no burrs, no flash!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
GREAT JOB! Nicely printed, no burrs, no flash!
Printed on:
| Creality Ender 3 |
Material:
|
PLA+ |
Very clean, no burrs or flash! Will use to create spiky stars in my refractor that doesn't natively do it on its own.
Printed on:
| Prusa i3 MK2 Multi Material |
Material:
|
PLA |
Very clean, no burrs or flash! Will use to create spiky stars in my refractor that doesn't natively do it on its own.
Printed on:
| Prusa i3 MK2 Multi Material |
Material:
|
PLA |
Very clean, no burrs or flash!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Nicely done! Clean printing, no flash, no burrs. Just an awesome job!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Nicely done! Clean printing, no flash, no burrs. Just an awesome job!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PETG |
Fast printing, neat and clean! No lines, no flash, great 3D printing!
Printed on:
| Prusa i3 MK2 Multi Material |
Material:
|
PLA |
Fast printing, clean print, no flash, great job!
Printed on:
| Ender 3 Pro |
Material:
|
PLA |
Nice 3D printing! No flash, clean print!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Great printing! Exactly what I needed!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Very good printing. Unfortunately, it arrived almost two months after I placed it. I like the printing but the speed good have been a bit better.
Printed on:
| CR-10S Pro |
Material:
|
PLA |
Nice printing. No flash, few burrs, but a very good job!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PLA |
Great Printing! A little bit of flash, but nothing I can't fix.
Printed on:
| Creality Ender 3 |
Material:
|
PLA |
Amazing!!! The print was exemplary! No flash, not burrs, just nearly perfect.
Printed on:
| Prusa i3 MK2 Multi Material |
Material:
|
Different materials Different colors |
Nicely done! Shipped fast, no issues, clean printing!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Another great print from Chris L3D! Perfect, what more can I say?
Printed on:
| Creality Ender 3 |
Material:
|
PLA |
Nicely done! No artifacts in printing, no flash, very clean. Just need to get the appropriate tubes for the full display. patiently awaiting the delivery of the body tubes. everything looks great!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Great printing! Nicely done, going to use it to display my Lunar Module and Russian LK lander models.
Printed on:
| Mega X |
Material:
|
PLA |
Great printing! Engines came out really clean, very detailed! Looking forward to attaching them to my Gemini Titan II model rocket for display!
Printed on:
| Creality CR-10 |
Material:
|
PLA+ |
Nicely done! No flash, very clean. Applied to my Falcon BFR model rocket, looks cool!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
EXCELLENT re-production! Smooth, no flash or extra plastic. Just like I remember when I was a young boy watching Fireball XL-5 on TV! In the process of building it, will paint it soon and already printed up the decals! Great job!!!
Printed on:
| Creality Ender 3 |
Material:
|
PLA |
Very nice representation of the LK Russian Lunar Lander. Smooth printer, lots of detail, clean printing, a little flash but not too much. Came out very nice!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
I like the way these parts come out. They are nearly flash-less, no scaffolding, tight lines, detail is smooth and not rough whatsoever. I think I found my new 3D printer!
Printed on:
| Creality CR-10-S5 |
Material:
|
PLA |
Remarkable printing, great detail! One side is smooth, the other side rough, but it will only be displayed on the good side. Need to paint it up and find suitable mounting plate. All in all, bigger than I thought, but also a very good printing!
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PLA |
It was an interesting make, however, it ended up being soo small, I couldn't even attach the legs to it. Not Walters World fault, but the person who designed. Perhaps it could be scaled up about 5-10X?
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PLA |
The printing came out very clean! Not a lot of flash on the parts, hardly any really. Everything was smooth, could not detect any layer lines. Repainted the whole model and added detail and kit bashed the TAGSAM to make it look authentic.
Printed on:
| Original Prusa i3 MK3S |
Material:
|
Different materials Different colors |
Truly excellent printing! The model of the Curiosity Rover had no defects and was shipped with a good amount of packaging and put into plastic bags. It was a breeze to assemble.
Printed on:
| Original Prusa i3 MK2 |
Material:
|
Different materials Different colors |
Excellent printing!!! Parts were very smooth, color was authentic, although I did repaint a few parts to match the real thing. Mounted it and put it near my Jupiter globe!
Printed on:
| Creality CR-10 |
Material:
|
Different materials Different colors |
Nicely done. Looks very realistic. Used it on my LEM model.
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Very Nicely done! Very Clean, no flash whatsoever. Looking forward to painting and displaying!
Printed on:
| Creality Ender 3 |
Material:
|
PLA |
Parts arrived in great condition. Printing was exceptional.
Printed on:
| Creality CR-10 |
Material:
|
PLA |
My original mistake of not ordering three landing pads for the Viking Lander. These came to me in perfect condition.
Printed on:
| Creality CR-10 |
Material:
|
PLA |
This model was a disaster. The main dish antenna was not printed correctly and thus was not perfect in any way. There was no hope in salvaging this model. This was a loss of $16.
Printed on:
| Creality CR-10 |
Material:
|
Different materials Different colors |
With the arrival with one broken leg, probably due to shipping and packaging, this Crew Dragon was nearly perfect. I did not realize it was so big.
Printed on:
| Creality CR-10 |
Material:
|
PLA |
I would have to say that this order was nearly flawless.
Printed on:
| MakerBot Replicator 2 |
Material:
|
Different materials Different colors |
I would say that this incarnation of the New Horizon's Probe spacecraft came out rather well. The Antenna assembly looks nearly perfect, the main bus was done with good results and the stand looks pretty good as well.
Printed on:
| Creality CR-10 |
Material:
|
Different materials Different colors |
Excellent work!. I had farmed out my first production of this model to another firm and they did not do such a great job of printing it. However, this printing was far better and I probably will rely on AstroLabs 3D for my future printing needs!
Printed on:
| Creality Ender 3 |
Material:
|
Different materials Different colors |
Exceptionally well made! True to real life, just needs a little paint to make it look realistic, but it is a fine model soon to be put on display!
Printed on:
| Original Prusa i3 MK2 |
Material:
|
Different materials Different colors |
Parts came today in the mail. I assembled the ship and will need to paint it before displaying it. It has a nice size to it. Waiting for the other 2 landing pads, made the mistake of not ordering all three when placing the original order.
Printed on:
| Original Prusa i3 MK2 |
Material:
|
PLA |
Item turned out great! Needs to be painted and displayed.
Printed on:
| MakerBot Replicator 2 |
Material:
|
PLA |
Got the ship today. Needs to be cleaned up and painted, but it looks like a good printing!
Printed on:
| Original Prusa i3 MK2 |
Material:
|
Different materials Different colors |
Looks very good. Have not had time to put it together, but it looks complete and I will mount it for display after it is assembled and painted!
Printed on:
| MakerBot Replicator 2 |
Material:
|
Different materials Different colors |
The print came out great! I did a little painting to make the ship as accurate as possible. Took a little while to put together.
Printed on:
| Original Prusa i3 MK2 |
Material:
|
Different materials Different colors |
Printing came out rather good. However, there was some warping evident in the concentricity of the body tubes, but all is good.
Printed on:
| Creality Ender 3 -2 |
Material:
|
Different materials Different colors |
Very nicely manufactured. Fits perfectly, great color. That's why I keep going back to MilkNasty!
Printed on:
| Original Prusa i3 MK2 |
Material:
|
PLA |
Nice light blue color. Works the way it was designed. MilkNasty is a great printer! Fast and responsive!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Excellent print! Dark blue color, I like it a lot! Works the way it was designed. Couldn't be better!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
When I ordered it, I had no idea how big this was. But being so big, it is solid and colorful. It will come in handy when traveling with my tripod as it keeps the legs locked together. This was printed very well and quite fast! Five stars for Milknasty!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Another great product ! Unfortunately, this design was not made for my Audiostar hand controller. Not the printers fault, but the designers. Nicely made, great color! I will see if I can make it better and have it reprinted. Thanks Again!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Again, another nicely made 3D printed item. I had to modify the dovetail mount to fit my ETX-90, but it all worked out in the end. Very sturdy, just need to put a finder scope into it and I am all set!
Printed on:
| Original Prusa i3 MK2 |
Material:
|
PLA |
These are great little hangers for my celestron tripod spreader. I can hang my Bahtinov mask, level and red head lamp from them. Very ingenious design, never thought of that. great job in printing, that's why I keep going back!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Nicely made, had to open up the holes for the M4 screws, but it all worked out in the end! Perfectly made for a Celestron Tripod, not so much for a Meade.
Printed on:
| MakerBot Replicator 2 |
Material:
|
PLA |
This was a very good 3D printing of a pair of knobs for a friction based assembly. The color came out great. However, the threads associated with the design were a little weak, not being able to retain the M4 bolt to be inserted within it. However, that problem was easily fixed with some super glue. All in all was a very good printing!
Printed on:
| MakerBot Replicator 2 |
Material:
|
PLA |
Nicely manufactured. Sturdy, colorful and well made. Since I do not have my own 3D printer, I am happy with whomever can print this up for me!
Printed on:
| Creality CR-10 |
Material:
|
Different materials Different colors |
I came out a little small, but then again, I never knew what the dimensions were beforehand, but the printing was top notch!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
The product was a little tight, but it works nonetheless. Nice Color too!
Printed on:
| Creality CR-10 |
Material:
|
PLA |
Printed on:
| Original Prusa i3 MK3S |
Material:
|
PLA |