Stand 'Filament Spool'

Model by
loading...
Model Description
This is a multifunctional stand for your filament spools. Besides functioning as a stand,
it also guides the end of the filament through one of the holes, so that...Show more it isn't so loose anymore.

Suitable for:

- Ø1.75mm and Ø3mm filament
- spool diameter of Ø200mm outside and the inside between the sides of the spool is 73mm

Print settings:

- 250 micron
- 20% infill
- 3600 mm per minute
- no support
About The Model’s Author
5 models uploaded
Approved profile