You can buy this printer on eBay.de:
https://www.ebay.com/usr/3dsvet
Kossel XXL 1000 MAGNETIC description:
This is the XXL version of the delta 3D printer. I
...Show more have been building them for two years now and I am really happy with them. It has gone through many upgrades and changes and now really works for me. This version is really big, fast and quite compared to other printers. It is good starting point to learn how 3D printing proces works. Than one could do many upgrades to it.
PRINTER SIZE:
Build volume is a cylinder. XXL of course has way bigger print width than Kossel XL.
Kossel Mini is a joke when you it next to it. :)
Personally I thing it is good idea to go for XL or XXL size.
Cost is not that higher and you have way more freedom when choosing what to print.
With Mini I always ran out of room for real life prints.
BUILD SIZE:
Standard glass diameter is 380mm.
Max print size is around 400 to 500mm depending on the rods lenght.
MANUALS:
With the purchase you get manual for mechanical and electronics assembly in PDF format.
After putting it all together calibration needs to be done.
I did my best to make quality mind-map manual. Believe me. When you learn this you will not need auto calibration.
https://www.mindmeister.com/597460511
MAIN DESCRIPTION:
- This is XXL version DELTA PRINTER
- 3x vertical profiles are 4020 1000mm long
- 12x horizontal profiles are 2020 500mm long
- CRUCIAL PARTS ARE PRE ASSEMBLED
- 6x magnetic rods
- 3x carriages
- 1x effector
- Glass (transparent) has diameter of 380mm, 4mm
- Magnetic rods are 475mm axis to axis
- Magnetic joint (all joints have double magnets for extra strenth)
- Electronics: Arduino Mega + RAMPS 1.4 + 4x DRV8825 + LCD4002 + 3x optical end stops
- Without heated bed (can be easily added later)
IN THIS KIT YOU GET:
*** Printed parts ***
- All the printed parts (look at the pictures)
*** Mechanics - ALU profiles ***
- 3x 4020 Aluminium profiles 1000mm
- 12x 2020 Aluminium profiles 500mm
*** Mechanics ***
- 6m GT2 belt
- 3x GT2 pulley 16teeth (goes on NEMA17 shaft)
- 6x F623ZZ bearing for belt guidance on top
- 3x GT2 belt tensioner (spring)
- 1x MK8 extruder parts
- 6x rods/arms magnetic
- 9x wheels for carriages
- 1x hot-end for 1,75mm fillament, with PVC tube (6/4mm), 0.4mm nozzle
- 1x glass - 380mm diameter - WHITE COLOR!
- 3x springs to help magnets hold effector and carriage together
*** Motors ***
- 4x NEMA17 motor 1,8degre per natural step with 1m cable with dupont connector already made
- 3x vibration dampers for NEMA17 motors
*** Electrical/electronics ***
- 1x ARDUINO MEGA 2560
- 1x RAMPS 1.4
- 4x DRV8825 stepper drivers
- 1x LCD 2004 RepRap
- 3x optical sensor (end stop)
- 1x DC-DC voltage regulator for fan speed control
- 1x power supply 12V 10A
- 3x mini switch (if you are gonna put some lights of extra fans on printer)
- 1x set of dupont cables
- 1x set of dupont connectors (if you need them for
