Chair 'Single Line' by 3DParts4U

Model by
loading...
Model Description
I designed my own chair in FreeCAD 0.17. I designed it also to be suitable as a 3D printable chair, because of the simple geometry.
The chair consists of one...Show more single (folded) line with a thickness of 40mm. A problem for me is the size of the design chair. It's too big for an average 3D printer.

Print settings:

- 250 micron
- 20% infill
- 3600 mm per minute
- no support (print it on its side)
About The Model’s Author
5 models uploaded
Approved profile