Snap-together Sphere von Lesley_3ddes

loading...
Modellbeschreibung
3D model of aubenc. The models were repaired and checked for printability.

A simple sphere made from three interlocked rings I made one day to show the whole...Zeig mehr process to a friend.

The dimensions of the rings in the provided stl files are 60mm outer diameter, 20mm height and 3mm thickness. They have been generated with one face at every 2mm of the perimeter and also, a gap of 0.4mm in the slots which gave a nice fit for the rings printed by bot1334.

The zip file contains two more examples (40mm diameter, 5mm and 10mm height and, if I'm not wrong, 2mm thickness) however, I was not using any "gap" parameter for those so... they'll need some cleaning to fit properly.

Replaced the OpenSCAD file with v3 version which fixes a bug in the tolerances between rings. Thanks a lot to foofoodog for pointing this out!!

Print and snap the rings together.
Über den Autor des Modells
50 models uploaded
Genehmigtes Profil