由Scarlett_des创建的G-Clamp fully printable

模型来自
loading...
模型描述
3D model of johann517. The models were repaired and checked for printability.

Small G-Clamp fully printable without support.
Additional a larger frame and screw is...显示更多 provided which adds another centimeter.
The protector can be reused for the larger clamp.

The screw has a fair amount of space, so it should fit without problems into the frame screw hole. Should anyone still have an issue let me know and i can provide an additional version.

The best way to mount the protector is to use the clamp itself by closing the clamp until the screw ball and protector ball joint clicks together or use your thumb.

For my requirements i used only 25% (~3 hour print) because i need just to hold things in place while the glue is drying. For more force 100% infill is recommended and don't forget it's not made of steel.

Enjoy :)

Small clamp:
clamp_frame.stl
screw_and_knurled_knobHD.stl
clamp_protector.stl

Large clamp (+1cm):
clamp_frame_long.stl
screw_and_knurled_knob_longHD.stl
clamp_protector.stl

Thank you very much !

Printer brand:
Ultimaker

Printer:
Ultimaker 2

Rafts:
No

Supports:
No

Resolution:
0.2mm

Infill:
100% if you want it really strong

Notes:
Printed in PLA
https://www.youtube.com/channel/UCrUMqf0p3FYcOsoZB-5LP0Q
关于模型设计师
21 models uploaded
简介已审核