Hydroplane RC Tires から John_3dmodel

モデル制作者
loading...
Model Description
3D model of rclifeon
The models were repaired and checked for printability.

The inner wheel is made from PLA (3 perimeters and 30% infill), and the tire was...さらに表示 printed with a flexible filament (5 perimeters and 5% infill). Yes, you need a high number of perimeters for the tire to be rubber-like.

The hex size is 17mm, make sure it will fit your car before printing. Once the parts has been printed, slide the wheel and tire together with a few drops of super glue.

EDIT: I have now added a 12mm hex version of the PLA wheel, make sure you pick the correct size!

Supports:
No

Resolution:
0,2

Notes:
I printed the inner PLA wheel on the Creality CR-10 and the flexible tires on the Tristarbot M1.
https://instagram.com/rclifeon?igshid=YmMyMTA2M2Y=
モデル制作者について
19 models uploaded
承認されたプロフィール