Adjustable Z end stop - CCT / Wanhao Di3 Plus / Monoprice Maker Select から Dennis_3dwor

モデル制作者
loading...
Model Description
3D model of teachingtech
The models were repaired and checked for printability.

A modified Z stop holder so the homing height could quickly and accurately be...さらに表示 adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed.

I reverse engineered the part from a very close to fitting design by kapral_82. The process is covered in the linked video.

Upper - add two bolts: M3 x 10mm as a retainer and M3 x 30mm as the end stop screw. Cut the thread carefully the first time you insert them.

Lower - press in two M3 lock nuts. Use M3 x 10mm bolts to hold to printer frame.
www.youtube.com/c/teachingtech
モデル制作者について
27 models uploaded
承認されたプロフィール