Print In Place V8 and V6 Engines! から Alexander_3d

モデル制作者
loading...
Model Description
3D model of turbo_sunshine
The models were repaired and checked for printability.

This is a print in place model, meaning there is no assembly...さらに表示 required!

Important:
-Use 0.2mm layer height (or finer)
-Use a 0.4mm Nozzle (or finer)
-No Support
-No horizontal expansion compensation!

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20

Filament brand:
none

Filament material:
PLA
https://www.instagram.com/sunshine_turbo
モデル制作者について
33 models uploaded
承認されたプロフィール