3D model of bqeducacion
The models were repaired and checked for printability.
A challenge for your printer!!
"Braq" is a jointed dragon of 42 pieces.
...Показать больше
Once printed pieces only need an elastic cord 2 to 3mm thick to join them.
-The pieces have little contact surface to the bed, so it is very important to snug bed printer.
-When setting the gcode file, add adhesion brim or raft. No need to add any additional support because the files include small supports have to eliminate once printed.
-Printed 0.2 mm height, fill density 10% , PLA
https://www.instagram.com/bq.educacion
