Make #9 - Jingle Bells から Johnnn_3d

モデル制作者
loading...
Model Description
3D model of faberdasher
The models were repaired and checked for printability.

"... Jingle bell rock; Jingle bells swing, and Jingle bells ring; Snowing and...さらに表示 blowing up bushels of fun; Now the jingle hop has begun..."
Print out and ring in the Season with these fun little bells! This clever design incorporates a working print-in-place Clapper- way more fun than another whistle ;)

Slice with 2 shells (/perimeters) and 0% infill. At coarse resolution (0.3mm), you will find prints have extra shimmer (and print quicker!).
Created in stunning Faberdashery Bling Bling Gold PLA^.

Each bell requires ~4g of material (<1m of 3mm / 1.75mm filament). Because of the small features (internal clapper), we suggest printing multiple bells to allow sufficient cooling per layer. A classic Ring-of-Bells plated version is provided. You may need to carefully poke a pin through the sides to release the clapper. Just attach some decorative twine to finish.
https://twitter.com/faberdasher
モデル制作者について
75 models uploaded
承認されたプロフィール