A little simple ocean giant for the bathtub by Jordan_3dmod

loading...
Model Description
3D model of vandragon_de
The models were repaired and checked for printability.

A small simple ocean giant for the bathtub
But it's also great fun to play on...Show more dry land.

The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you just have to put a little more weight on the ground
stabilization must be present.

Material:
RED - Fillamentum (0.15) Prusa MK2s
BLUE - Janbex (0.2) Wanhao i3 V1

Although it is a lot of fun to draw boats and bring them to life, it takes a lot of time to research and draw. Especially the 1:1000 scale models are very time-consuming.

Printer brand:
Prusa

Printer:
i3 MK2S

Rafts:
No

Supports:
No

Resolution:
0.15

Infill:
50% and 15%

Notes:
The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you just have to put a little more weight on the ground rnstabilization must be present.rn
https://www.instagram.com/vandragon_de
About The Model’s Author
24 models uploaded
Approved profile