Constructora Field Car #3 Spanish Civil War 28mm by Jerry_3d

Model by
loading...
Model Description
3D model of deweycat
The models were repaired and checked for printability.

This is a 28mm model of the Spanish Civil War Constructora Field Car #3.
I started with...Show more Jarlang's excellent model of the Constructora #2, and upscaled it to 28mm. I created the new front end to represent the different design on Car #3, as well as making the wheels separate (they fit into recesses under the hull) and adding details- pistol ports, engine access panels, vision slits and a back door. This vehicle was used as an APC, and carries 9 men, so its value in a Bolt Action game is considerable; with a 7+ armour rating, in a properly historical force mix, it provides some good opportunities.
There were at least nine of these cars crafted by the Loyalists in Barcelona; note the ventilation Tubes on this model are set into the top of the hull; and don't protrude as much as the earlier models - each car has differences, and I did this one up as best I could from both english and spanish language sources. As they were built on the fly, there are few records post-SCW recounting their manufacture.
If using them when gaming the Spanish Civil War, please don't be limited to using it as a Loyalist AFV; both sides in the conflict captured their opponent's AFVs and used them against their former owner.
If trying to score the vehicle for a point value, please use Richard HUMBLE's excellent "Bolt Action Vehicle Design System".
https://www.facebook.com/deweycatproductions
About The Model’s Author
51 models uploaded
Approved profile