Bibo The Bibo 2 Touch

About The Bibo 2 Touch

Machine Parameters:

• Extruder Number: 2 
• Frame: 6mm thick aluminum composite panel 
• Full-color Touch Screen: Yes
• Laser Engraving: Yes
• WIFI Control: Yes
• Copy Printing: Yes 
• Continue Printing After Power Cut: Yes 
• Filament Run-out Detection: Yes 
• Removable Heated Bed: Yes (already leveled, usually no need to level it again)
• Number of Fan to Cool Plastic extruded: 2
• Printing Mode:USB connect PC or SD card or U disk 
• Machine Size:18.4*14*14.7(in) 
• Weight: 35.3 pounds 

Printing Parameters:

• Build Size :8.4*7.3*6.3(in) / 214*186*160（mm） 
• Printing Layer Resolution: 0.05-0.3mm 
• Max. Nozzle Temp.:270℃ 
• Recommended Software: Repetier-Host, Cura, Simplify3D 
• Compatibility: Windows, Mac, Linux 
• Filament Type:ABS, PLA, Dissolvable filament (PVA, HIPS), Flexible filament (TPU)
• Filament Diameter 1.75mm