| Build Volume | 90 x 143 x 175 mm |
| Layer Resolution X | 35 microns |
| Layer Resolution Y | 35 microns |
| Layer Resolution Z | 1.25 microns |
| Layer Resolution Low | 200 microns |
| Layer Resolution High | 10 microns |
| Print Speed Min. | 3 s/layer |
| Print Speed Max. | 1.5 s/layer |
Mars 3 is a resin 3D printer from ELEGOO. The machine offers a sand-blasted build plate and an upgraded FEP film claiming to provide more precise results. The light source resolution for this machine is 4098 x 2560 pixels. It also utilizes a heat sink system to increase efficiency of curing. ELEGOO described this machine as a 30% better version of Mars 2 in terms of prints definition.
