Alien Queen in lots of detail. Currently being hacked down to manageable chunks.
Model will be 300mm high total.
Work in progress, correcting holes, manifolds
...Show more and breaking down.
Thanks jon4tina noting the teeth and post prep wit removing the supports. Now opened up the front head in order work on this section easier.
Model parts list...
1. Head Rear. Options:1 part OR a,b,c and d.
2. Front head. Options: 1 part OR head split a and b, OR Jaw, Side plates, front, middle(see pic for infostructions)
3. Tongue biter (no idea what the correct name is)
4. Tail a
5. Tail b
6. Tail c
7. Tail d
8. Tail e
9. Right arm
10. Left arm
11. Right leg. Optional 1part or 3 parts a, b and c.
12. Left leg a
13. Left leg b
14. Chest arm left
15. Chest arm right
16. Torso front
17. Torso rear
18. Torso middle
Once all parts created i will be printing this asap. You are welcome to try and beat me to it : )
10% infill, 4 layer shell (1.6mm), .2mm layers.
Supports required in most places apart from -Head rear, -Tongue biter, -Left leg B.
All else will need supports for anything over 85 degree angle and if possible slap in the support to model spacing of 1mm for ease of removal.
