Nano Vise (V2) by PRIma by markzerger

loading...
Model Description
3D model of prima. The models were repaired and checked for printability.

NANO VISE V2 is here!
This is a complete renewal of my quite famous Nano Vise and in fact...Show more the vise base and slider has undergone some design & size corrections like no more sharp edges at the dove tail entry plus the vise jaw-height has increased to 6mm while the overall clamping width remains max. 20mm.The screw position on the slider part has been accurate re-positioned to provide more straight clamping movement.
2 types of slider available (blank or grooved jaw)

DESK CLAMP VERSION
What's completely new here is the C-clamp which includes one ball-joint system where the shaft is fixed by a M8x10mm Allen screw (with cylindrical head) to the vise base bottom.
Clamp it to your workbench or desk and you have a very compact sized vise which can be positioned as you like.
original C-clamp fits table plate from 15 up to 40 mm thickness
additional C-clamp for bigger thickness available as well

all parts can be printed without support
happy printing!

Printer brand:
Creality

Printer:
Ender 3

Rafts:
Doesn't Matter

Supports:
No

Resolution:
0.2

Infill:
minimum 20% or more

Filament brand:
any

Filament color:
any

Filament material:
any

Notes:
I recommend minimum 2-3 walls for rigidity

in case the M8 thread on the 3D printed joint is too tight re-cut it with a tap drill
https://www.youtube.com/channel/UCkWGgSjbHl0JN86glKJZuTA
About The Model’s Author
127 models uploaded
Approved profile