3D model of aubenc. The models were repaired and checked for printability.
Just 11 faces and parametric.
kl bttl mk2.stl slices with one error (at least...Show more for me) which adds a layer closing the bottle neck at the top of the inner wall... also, RepG was reporting 20cc! of material needed
Added kl_bttl_mk2 2.stl: radius 30, height 60, walls 1.1mm, 7cc & no slicing error.
The top will need active cooling to print and even like that, it may not print nice :-(
You can go to the "body()" module and set r2 to some little value to help printing the top but THEN... you'll get a huge poly count of 18 faces :-P
The provided stl are supposed to be in the dimensions: 80mm OD, 80mm height and 2mm wall thickness.