3D model of teachingtech
The models were repaired and checked for printability.
The VKAR Bison V2 is serious fun, and about half the price of the Helion it's
...Show more based on. Only trouble is the weak wishbone connection: the bushing and pin. I broke both of mine and then two threaded rod replacements. Time to create a 3D printed alternative in Onshape. Sliced in Simplify3D and printed on a Prusa i3 MK3, these turned out perfectly. Yet to have a breakage since fitting them, plus fitment and change are much easier now.
Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
30
Notes:
Four needed for front suspension. I recommend printing spares.
Four are needed plus four M3 x 50mm (or longer) bolts, four M3 nyloc nuts and two M3 washers. Drill out hole with 3mm drill bit.
www.youtube.com/c/teachingtech
