由Tim_3dworld创建的Low Poly Sandals – Ninjaflex (UK size 4)

模型来自
loading...
模型描述
3D model of francfalco
The models were repaired and checked for printability.

Loosely inspired by Philipe Starck Tong footware-
'Low poly' form version...显示更多 of the sandal printed in Ninjaflex.
Left and right feet models included.

Ninjaflex can be tricky to print but these came out great after a
15 hour per foot print time. Printed on my UM 2 (standard feeder).
0.2mm, 235C @ 20mm/s.

I didn't print with supports and those overhangs are a bit lumpy, but if you can use supports that work then that would help. I would suggest a 20% infill - version shown has a 30% and are a tad stiff!

The .stl files included are UK size 4 (230mm length approx)

Thanks to cjkturtle I've repaired some broken geometry in both sandals - v2

Enjoy!
http://twitter.com/francfalco
关于模型设计师
47 models uploaded
简介已审核