Creality Creality CR-10

Creality CR-10 #0Creality CR-10 #1Creality CR-10 #2Creality CR-10 #3Creality CR-10 #4

Share

Machine type

3D Printer

Technology

FDM (Fused Deposition Modeling)

Materials

PLA, ABS, Nylon, Bronze PLA, Wood PLA, PC-ABS, PC, ASA, ULTEM 1010, Rubber/Flex (TPU), Thermochromic (Chameleon) PLA, PETG, Carbon Fiber, PLA+, Polyether Ether Ketone (PEEK), PLA-CF , CF-Nylon, Marble PLA, PolySmooth™ (PVB), PETG-CF, Heat Treatable PLA (HTPLA), PLA/PHA, Amphora HT5300, Matte Fiber HTPLA, UVColorСhangingPLA, TPU95A

Average Price

$920.00

Build Volume 300 x 300 x 400 mm (11.8 x 11.8 x 15.7 in.)
Layer Resolution Low 300 micron (0.011 in.)
Layer Resolution High 50 - 100 micron (0.004 in.)
Owner Ratings (14)   4.4
PRINT QUALITY:
RELIABILITY:
EASE OF USE:
FAILURE RATE:
RUNNING EXPENSES:
SOFTWARE:
BUILD QUALITY:
VALUE:
CUSTOMER SERVICE:
COMMUNITY:

Owner Feedback

Creality has a big and active community with manufacturers and developpers that listen actively to feedback.
Build quality is very good, and valuu for build volume is amazing.

There is no proprietary software, but there are a lot of options out there.
Dec 20, 2020
Great starter printer for those new to 3D printing. Good value for the cost, without breaking the budget. Maintenance is a little more hands-on, but is very simple and easy to do.
Overall a great beginner printer. Large community to help with troubleshooting problems. Great printer for the money.
It's a great printer after tuning and tweaking it's settings
This is a highly upgraded cr-10 that is insanely reliable.
Aug 26, 2019
never fails me
May 27, 2019
The Creality is probably the best 3D printer for its very low price. It's also very reliable and has a very easy conception. The printer is very reliable and can handle very long prints without any errors or failures. I am really satisfied of this printer. Equipped with a BondTech extruder and a E3D hotend makes this printer a must!
Apr 7, 2019
Bonne imprimante, fiable et précise.
Conception solide et propre.
Seul quelques bruits de ventilateur viennent déranger un peu.
Les pièces imprimées sont de bonne qualité, et peuvent entrer en concurrence avec des imprimantes bien plus chères.
Feb 5, 2019
Amazing printer
Jan 23, 2019
Simple to repair if you have issues. Parts are readily available
Jan 10, 2019
Good prints and a big print volume. Not for startes or people who don't like tinkering or repairing the machine themselves. If it works it is a brilliant machine.
Dec 14, 2018
Very nice printer for that amount of money. You need to know your printer, after that every print will be a success. Lot of simple extra upgrades can be made. The software doesn't need any explanation. There is a large community, so tips and trics are always available.
Nov 18, 2018
The Creality cr 10 is not an easy to use printer, but the large community got your back. If you need help just ask after a few hours they're always somebody willing to help.
These printers are my work horses they handle a big bulk of my Treatstock work. Just not great for anything outside of PLA as they can not take the higher temps with out upgrades.

About Creality CR-10

Application:

  • Biological medical clinical guidelines
  • Customise, internet date printing service
  • Sand table, structure model printing
  • Toys,Cartoon, culture creative industry
  • Prototyping,Review,function verification
  • Overseas market
  • Education, DIY Maker

Advantages:

  • Industrial PCB Board, printing continuously 200hs
  • Linear bearing,higher accurency, move more stable
  • Importing high polyer material, wear over 2 years
  • Support cloud slice,printing, monit,management etc
  • Support Mobile APP remote control
  • Thermostatic box, no wrap edge
  • Simple operation for slice
  • Intelligent break printing
  • Could print larger size
  • Portable and stable
  • DIY Kits, finish assembling within 10 mints
  • Screw T Rod, higher precision

Technology Patent,Certificates, Quality Guarranty
 

F.A.Q. about Creality CR-10

  • How to properly set up the Creality CR-10?

Most owners claim that it’s very easy to put the Creality CR-10 together. However, you should keep in mind that this machine still demands a certain amount of skill and knowledge. Some screws can be lost during shipping, so it’s better to check that they’ve all arrived before starting, and don’t forget to adjust the wheels on each axis. If you can spin the wheel and not move the axis, it needs a little adjustment.  It’s also important to check the flatness of the glass and if it’s warped, you can either purchase a replacement glass or a mirror from IKEA."It’s not a push-button machine - you have to know what you’re doing and understand what symptoms you’re seeing in prints and how to correct them. But once you have experience, the machine is a joy to use", says Andrew Davie. He is the man behind the manufacturing service Doctor Boo's Astounding 3D Printing Press on Treatstock and moderator for the biggest Creality CR-10 group on Facebook.

  • Is the Creality CR-10 compatible with Slic3r ?

Creality CR-10 works well with slicing softwares such as Cura, Simplify3D and Slic3r.

  • Can you put a dual extruder on a Creality CR-10?

It’s possible in theory, and you can even find instructions and a dual extruder design on thingiverse.com However, it’s quite hard to do it without a high level of technical skills and knowledge.

  • Does the Creality CR-10 have a heated bed?

Yes, Creality CR-10 has a heated print bed.

  • What size of filament does the Creality CR-10 use?

1.75 mm

  • What is the difference between the CR-10 and CR-10S?

The major differences are that the Creality CR-10S has Bootloader, an Extra Z Motor and filament sensor, whereas the CR-10 doesn’t. But in general, there's no difference in print quality between the two models. If you need a detailed comparison, here is a video review by Nexi Tech:

  • Is the Creality CR-10 the same as the Hictop CR-10?

They look the same, and some of you may be wondering whether it’s just a re-branding or another version of the CR-10? Well, a Hictop representative claims that the “original” Creality CR-10 and the version sold by Hictop are the exact same products and that Hictop is just an authorized seller.

  • Where can I get useful information about Creality CR-10?

Useful links:

Reddit

Facebook

CR-10 Community reference page

Creality CR-10 Review

3D printed products made using the Creality CR-10

20170809_183025.jpg20170809_183112.jpg20170809_183017.jpg20170809_183104.jpg20170809_183136.jpg20170809_183050.jpg20170521_195934.jpg20170521_195928.jpg20170521_200033.jpg20170521_200024.jpg20170521_195958.jpg20170521_200112.jpg20170521_200009.jpg20170521_200017.jpg20170521_200004.jpg20170521_195946.jpg20170521_195940.jpg20170521_195953.jpg20170521_200107.jpg

All Comments (0)
No Comments